-
...9/19/thecus_n4100_brings_storage_space_to_your_lan/ Tom's Hardware: Thecus N4100]
[[Category:Thecus N4100]]
295 B (36 words) - 12:23, 18 January 2012
-
=== N4100+ only ===
...us_n4100_brings_storage_space_to_your_lan/ Tim's Hardware]), 4 TB (4x 1TB, N4100+ officially)
1 KB (158 words) - 12:23, 18 January 2012
-
Details have been reported to Thecus as case KKM-798736 on 2008/02/26.
Thecus hasn't released a new firmware for the N4100+ for a few years now.
1 KB (227 words) - 12:23, 18 January 2012
-
This is the dmesg output from Thecus N4100, firmware 1.3.04.
Linux version 2.6.9-n4100 (root@dev_222) (gcc version 3.3.2) #2 Fri Sep 15 16:20:22 CST 2006
7 KB (1,011 words) - 12:23, 18 January 2012
-
* [http://www.thecus.com/products_over.php?cid=1&pid=2 N4100 Product Page]
* [http://www.thecus.com/news_contentx.php?nid=336 N4100+ Announcement]
311 B (42 words) - 12:23, 18 January 2012
-
*Target: N4100
N4100 Media Server v1.0.02 Release Note
3 KB (500 words) - 12:23, 18 January 2012
-
* Target: N4100
...oad: N4100 TWONKYMEDIA-1.8.00 [http://thecus.nas.free.fr/Ftp/N4100/Modules/N4100-TWonkyMedia-1.8.00.zip]
2 KB (312 words) - 14:57, 2 February 2012
-
*Target: N4100
The commands below have to be executed on the thecus itself
1 KB (150 words) - 12:23, 18 January 2012
-
The N4100 '''does''' support modules with firmware 1.03.06 (and onwards?)
This is a list of known N4100(/N2100) modules :
509 B (65 words) - 12:23, 18 January 2012
-
List of desired modules for the N4100
[[Category:Thecus N4100]]
72 B (11 words) - 12:23, 18 January 2012
-
The following is a list of default installed software on the N4100. The information is based on firmware 1.3.04
For information about hardware and drivers, have a look at the [[Thecus N4100 Hardware]] page.
358 B (48 words) - 12:23, 18 January 2012
-
== Non-Thecus Firmwares ==
...nning_Debian_on_Thecus_n4100 some hints on how to install Debian Etch on a N4100] in the wpkg wiki.
424 B (62 words) - 12:23, 18 January 2012
-
[[Category:Thecus]]
...ed to be used as tracker for current major issues with Thecus firmware and Thecus (official) modules. Since the firmware used on various models is similar an
22 KB (3,197 words) - 12:23, 18 January 2012
-
Unlike N2100 and other N4100 boxes the N4100PRO is not an ARM device but has an x86 processor (AMD Geode
...h installation of additional software for Thecus boxes relate to N2100 and N4100/+ models. This software is compiled for an ARM architecture and so will not
832 B (142 words) - 12:23, 18 January 2012
-
...9/19/thecus_n4100_brings_storage_space_to_your_lan/ Tom's Hardware: Thecus N4100]
[[Category:Thecus N4100]]
295 B (36 words) - 12:23, 18 January 2012
-
=== N4100+ only ===
...us_n4100_brings_storage_space_to_your_lan/ Tim's Hardware]), 4 TB (4x 1TB, N4100+ officially)
1 KB (158 words) - 12:23, 18 January 2012
-
Details have been reported to Thecus as case KKM-798736 on 2008/02/26.
Thecus hasn't released a new firmware for the N4100+ for a few years now.
1 KB (227 words) - 12:23, 18 January 2012
-
This is the dmesg output from Thecus N4100, firmware 1.3.04.
Linux version 2.6.9-n4100 (root@dev_222) (gcc version 3.3.2) #2 Fri Sep 15 16:20:22 CST 2006
7 KB (1,011 words) - 12:23, 18 January 2012
-
* [http://www.thecus.com/products_over.php?cid=1&pid=2 N4100 Product Page]
* [http://www.thecus.com/news_contentx.php?nid=336 N4100+ Announcement]
311 B (42 words) - 12:23, 18 January 2012
-
*Target: N4100
N4100 Media Server v1.0.02 Release Note
3 KB (500 words) - 12:23, 18 January 2012
-
* Target: N4100
...oad: N4100 TWONKYMEDIA-1.8.00 [http://thecus.nas.free.fr/Ftp/N4100/Modules/N4100-TWonkyMedia-1.8.00.zip]
2 KB (312 words) - 14:57, 2 February 2012
-
*Target: N4100
The commands below have to be executed on the thecus itself
1 KB (150 words) - 12:23, 18 January 2012
-
The N4100 '''does''' support modules with firmware 1.03.06 (and onwards?)
This is a list of known N4100(/N2100) modules :
509 B (65 words) - 12:23, 18 January 2012
-
List of desired modules for the N4100
[[Category:Thecus N4100]]
72 B (11 words) - 12:23, 18 January 2012
-
The following is a list of default installed software on the N4100. The information is based on firmware 1.3.04
For information about hardware and drivers, have a look at the [[Thecus N4100 Hardware]] page.
358 B (48 words) - 12:23, 18 January 2012
-
== Non-Thecus Firmwares ==
...nning_Debian_on_Thecus_n4100 some hints on how to install Debian Etch on a N4100] in the wpkg wiki.
424 B (62 words) - 12:23, 18 January 2012
-
...ry to 512 MB. The throughput/speed will be about the same and according to Thecus there is no need to upgrade memory. However if you're using multiple module
* Thecus does not support these upgrades
8 KB (1,210 words) - 12:23, 18 January 2012
-
*Target: N4100+
** Download: [http://anderegg-sommer.ch/thecus/N4100PLUS-UNISON-1.0.00.tar.gz UNISON]
771 B (107 words) - 12:23, 18 January 2012
-
Have a look at the [[Thecus N2100 Module Development]] section first. The N4100+ is almost identical to the N2100.
and repacking it. You will get a module that installs on the N4100+.
376 B (63 words) - 12:23, 18 January 2012
-
=== N4100+ modules ===
This is a list of all known N4100+ specific modules.
2 KB (349 words) - 12:23, 18 January 2012
-
This page contains wishes for new N4100+ modules. If you have a wish/suggestion for a new module, please add it to
...d the [[Thecus N2100 Module Wishlist]] first before adding anything to the N4100+ Wishlist.
3 KB (443 words) - 12:23, 18 January 2012
-
* While creating RAID5, be sure to logout the Thecus otherwise the building process will be very very slow.
...allow to specify passive ports, but here's a way to add them: Log into the N4100+ via ssh. cd to /img/bin/rc. Edit the file rc.ftpd. Depending if you use an
1 KB (189 words) - 12:23, 18 January 2012
